Pressure To Voltage Calculator

Pressure To Voltage Equation:

\[ Voltage = \frac{(Pressure - P_{min})}{(P_{max} - P_{min})} \times (V_{max} - V_{min}) + V_{min} \]

Pressure (psi):

psi

P_min (psi):

psi

P_max (psi):

psi

V_min (volts):

volts

V_max (volts):

volts

Calculated Voltage:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is the Pressure To Voltage Conversion?

The Pressure To Voltage conversion is a linear scaling equation used to convert pressure readings from sensors into corresponding voltage outputs. This is commonly used in industrial applications where pressure sensors output a voltage signal proportional to the measured pressure.

2. How Does the Calculator Work?

The calculator uses the linear scaling equation:

\[ Voltage = \frac{(Pressure - P_{min})}{(P_{max} - P_{min})} \times (V_{max} - V_{min}) + V_{min} \]

Where:

\( Pressure \) — Measured pressure value (psi)
\( P_{min} \) — Minimum pressure range (psi)
\( P_{max} \) — Maximum pressure range (psi)
\( V_{min} \) — Minimum voltage output (volts)
\( V_{max} \) — Maximum voltage output (volts)

Explanation: The equation linearly maps pressure values within the specified range to corresponding voltage values in the output range.

3. Importance of Pressure To Voltage Conversion

Details: Accurate pressure to voltage conversion is crucial for sensor calibration, industrial automation, process control systems, and data acquisition where pressure measurements need to be converted to electrical signals for monitoring and control purposes.

4. Using the Calculator

Tips: Enter the measured pressure value, the pressure range (P_min and P_max), and the voltage output range (V_min and V_max). Ensure that P_max > P_min, V_max > V_min, and the pressure value falls within the specified pressure range.

5. Frequently Asked Questions (FAQ)

Q1: What if my pressure value is outside the specified range?
A: The calculation assumes the pressure value is within [P_min, P_max]. Values outside this range may not produce accurate results and could indicate sensor malfunction or incorrect range specification.

Q2: Can this formula be used for non-linear sensors?
A: No, this formula assumes a linear relationship between pressure and voltage. For non-linear sensors, different conversion formulas or lookup tables would be needed.

Q3: What units should I use for pressure and voltage?
A: The calculator uses psi for pressure and volts for voltage, but the formula works with any consistent units as long as all pressure values use the same unit and all voltage values use the same unit.

Q4: How accurate is this conversion?
A: The accuracy depends on the linearity of your sensor and the precision of your range specifications. For highly accurate applications, sensor-specific calibration may be necessary.

Q5: Can I use this for reverse calculation (voltage to pressure)?
A: Yes, the formula can be rearranged to calculate pressure from voltage: \( Pressure = \frac{(Voltage - V_{min})}{(V_{max} - V_{min})} \times (P_{max} - P_{min}) + P_{min} \)